UW12 – IP68 Rated Magnetic Yoke

Yoke for use where Permanent Magnets or Full Wave DC are Permitted

The UW12 magnetic yoke body is moulded from high impact glass filled Nylon and is internally encapsulated with polyurethane. The leg joint exiting through the body is also sealed between the laminates to prevent water migration.

The UW-12 IP68 rated magnetic yoke is designed to operate from a 12V portable battery or from a 12VDC, 2.5 amp power supply. The D.C. power supply should have (primary) A.C. circuit isolation protection to preclude any electrical hazard.

Power supplied to the unit must be controlled by “top side” switching or by an approved underwater switching device provided in line with the power cable.

No switch is provided on the UW-12. Duty cycle is 100%.

Checks should be made to determine that adequate field strength is maintained due to voltage/current drop through the supply cable.

Rating IP68 – Protected Against the effects of temporary emersion in water, following manufacturer  defined terms

LIMITED WARRANTY*: The UW-12 magnetic yokes are warranted against defective material and workmanship for a period of 120 days from the date of purchase.